View LTM300M1-P01_4792196.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1bhf @-5..1 .0%&- product information product information samsung tft-lcd product information model : ltm300m1 - p01 samsung tft samsung tft - - lcd product information lcd product information model : ltm300m1 model : ltm300m1 - - p01 p01 issued date : 2006-05-13 lcd application engineering 2, tcs team samsung electronics co . , ltd. note : this is product information is subjec t to change after 3 months of issuing date. www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information contents general description --------------- ----------------------- ---------------- --------------- ------------ (3) 1. absolute maximum ratings ------------------ ----------------- ------------------ -------------- (4) 2. optical characteristics ------ -------------------- ----------------- ------------------ -------------- (6) 3. electrical characteristics -- ------------------- ------------------ ---------------- --------------- (12) 3.1 tft lcd module 3.2 back light unit 3.3 inverter specification 4. block diagram ---------------- ------------------ ------------------ ---------------- --------------- (17) 4.1 tft lcd module 4.2 back light unit 5. input terminal pin assignment --------------------- ----------------------- ------------------ (18) 5.1.1 input signal 5.1.2 input power 5.1.3 inverter input connector 5.2 back light unit 5.3 input signals, basic display colo rs and gray scale of each color 6. interface timing ------- ------------------- -------------------- ------------------- ---------------- (23) 6.1 timing parameters ? dual mode 6.2 timing parameters ? single mode 6.3 timing diagrams of interface signal ( de only mode ) 6.4 tmds interface timing setting 6.5 tmds rx(sil1169) programming mode data 6.6 tmds rx(sil1169) input skew 6.7 tmds rx(sii1169) i2c data valid delay 6.8 power on/off sequence 6.9 inverter power sequence 6.10 vdd power dip condition 7. outline dimension ---- -------------------- -------------------- ------------------- ---------------- (31) 8. general precaution -- -------------------- -------------------- ------------------- --------------- (33) 8.1 handling 8.2 storage 8.3 operation 8.4 others www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information features general description description applications general information LTM300M1-P01 is a color active matrix liquid crystal display (lcd) that uses amorphous silicon tft (thin film transistor) as swit ching components. this model is composed of a tft lcd panel, a driver circuit and a back lig ht unit. the resolution of a 30.0? is 2560 x 1600 and this model can display up to 16.7 millions colors. ? high contrast ratio & high aperture structure ? high speed response ? wqxga (2560 x 1600 pixels) resolution ? s-pva (super patterned vertical alignment) mode ? direct blu structure (cold cathod fluorescent tube) ? sync & de(data enable) mode ? dual link tmds serial interface (4pixel/clock) ? rohs compliance ? pb-free compliance ? workstation & desktop monitors ? display terminals for av application products ? monitors for industrial machine ? hdtv, medical machine * if the module is used to other applicati ons besides the above, please contact sec in advance. mm 0.2505(h) x 0.2505(w) pixel pitch mm 641.28(h) x 400.8(v) active display area typ note haze 44% , hard-coating (3h) surface treatment cd/ ] 400 luminance of white normally black display mode rgb vertical stripe pixel arrangement pixel 2,560 x 1,600 number of pixels colors 8 bit - 16.7m display colors unit specification items www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information note (1) mechanic al tolerance is ? 0.5mm unless there is a special comment. mechanical information 1. absolute maximum ratings if the condition exceeds maximum ratings, it can cause malfunction or unrecoverable damage to the device. note (1) ta= 25 ? 2 ? c 4.9 - 42.3 - - max. w/ inverter assembly kg - - lcd module only kg - - weight w/ inverter ass?y mm - - depth (d) mm 436.8 - vertical (v) w/o inverter ass?y mm 677.3 - horizontal (h) module size note unit typ. min. item v 21.0 gnd-0.3 v dd power supply voltage (3) g 1.5 - v nop vibration ( non - operating ) (2) g 50 - s nop shock ( non - operating ) ? 50 0 t opr glass surface temperature (operation) (1) ? 60 -25 t stg storage temperature note unit max. min. symbol item www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information (1) temperature and relative humidity range are shown in the figure below. a. 90 % rh max. (ta ? 39 ? c) b. maximum wet-bulb temperature at 39 ? c or less. (ta ? 39 ? c) c. no condensation (2) 11ms, sine wave, one time for ? x, ? y, ? z axis (3) 10-300 hz, sweep rate 10min, 30min for x,y,z axis fig. temperature and relative humidity range (39,90) (39,90) (60,27.7) (60,27.7) (50,50.4) (50,50.4) ( ( - - 25,5) 25,5) (39,90) (39,90) (60,27.7) (60,27.7) (50,50.4) (50,50.4) ( ( - - 25,5) 25,5) www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information 2. optical characteristics * c.g.l : color grayscale linearity (continue to the next page) sr-3 (7),(8) (6) sr-3 cd/m2 - 400 350 y l luminance of white (center of screen) g-to-g bm-7 msec - 6 - t g-g,avg (5) bm-7 18 12 - tr + tf on/off response time msec normal ? l,r =0 ? u,d =0 viewing angle (9) 0.02 - - ? u'v' white c.g.l - 0.468 - wv' - 0.198 - wu' white - 0.197 - bv' - 0.164 - bu' blue - 0.563 - gv' - 0.125 - gu' green - 0.525 - rv' - 0.459 - ru' red color chromaticity (cie 1976) 0.329 wy - 0.313 - wx white - 0.060 - by - 0.150 - bx blue - 0.608 - gy - 0.300 - gx green - 0.330 - ry - 0.640 - rx red color chromaticity (cie 1931) (3) sr-3 - 900 500 c/r contrast ratio (center of screen) note unit max. typ. min. condition symbol item the optical characteristics should be measured in a dark r oom or equivalent. measuring equipment : topcon bm-7,spectroradiometer sr-3 (ta = 25 ? 2 ? c, vdd=18v, fv= 60hz, fdcl k=134.25mhz, il = 6.0marms) www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information note (1) test equipment setup the measurement should be executed in a stable, windless and dark room between 30min after lighting the back light at the given temperature for stabilization of the back light. this should be measured in the center of screen. single lamp current : 6.0ma environment condition : ta = 25 ? 2 ? c 2 ? bm-7 1 ? sr-3 field photo detector photo detector lcd panel tft - lcd module the center of the screen sr-3 : 50 y bm-7 : 50 y field (4) sr-3 % 25 - - b uni brightness uniformity (13 points) k - 6500 - - color temperature % - 72 - - color gamut note unit max. typ. min. condition symbol item - 65 - ? d - 65 - ? u ver. - 75 - ? r (8) sr-3 degrees - 75 - cr ? 100 ? l hor. viewing angle - 89 80 ? d - 89 80 ? u ver. - 89 80 ? r (8) sr-3 degrees - 89 80 cr ? 10 ? l hor. viewing angle www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information note (2) definition of test point note (3) definition of contrast ratio (c/r) : ratio of gray max (gmax) & gra y min (gmin) at the center point ? of the panel note (4) definition of 13 point s brightness uniformity(100% white) buni bb b = ? 100 (max min) max bmax : maximum brightness bmin : minimum brightness cr g g = max min gmax : luminance with all pixels white gmin : luminance with all pixels black 13 256 768 1280 1792 2304 160 800 1440 active area : test point 8 3 2 1 6 11 12 10 5 4 9 7 480 1120 www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information note (5) definition of response time a. on/off response time : sum of tr, tf b. gray to gray response time - measuring gray : 31 ? 63, 63 ? 95,95 ? 127, 127 ? 159, 159 ? 191, 191 ? 223 grays and vice versa -t g-g, avg : average response time of ones between above grays black (tft off) white (tft on) black (tft off) 100% 90% 10% 0% t r t f optical response display data 96 gray 128 gray 95 gray 127 gray gray to gray response black 0% 100% 10% 90% t r t f white (example) time www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information note (6) definition of lum inance of white : luminance of white at center point ? note (7) definition of color chromaticity (cie 1931, cie1976) color coordinate of red, green, blue & white at center point ? note (8) definition of viewing angle : viewing angle range (cr ? 10, cr ? 100) www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information note (9) color grayscale linearity a. test image : 100% full white patte rn with a test pattern as below b. test pattern : squares, 40mm by 40mm in size, filled with 255, 225, 195, 165, 135 and 105 grays steps should be arranged at the center of the screen. c. test method -1 st gray step : move a square of 255 gray level should be moved into the center of the screen and measure luminance and u? and v? coordinates. - next gray step : move a 225 gray s quare into the center and measure both luminance and coordinates, too. d. test evaluation where a, b : 2 gray levels found to have the largest color differences between them i.e. get the largest u? and v? of each 6 pair of u? and v? and calculate the u?v?. ? u' v' = (u' - u' ) + (v' - v' ) ab 2 ab 2 www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information 3. electrical characteristics 3.1 tft lcd module the connector for display data & timing signal should be connected. ta = 25 ? c note (1) the ripple voltage shou ld be controlled under 10% of v dd . 2pxl/clk mhz - 134.25 - f dclk main frequency 1pxl/clk hz - 59.91 - f v vsync frequency khz - 49.31 - f h hsync frequency mhz - 71.0 - f dclk main frequency tmds (sil178 or sil170 tx) dual link tmds interface type (3) a 3.0 - - i rush rush current khz - 98.713 - f h hsync frequency hz - 59.97 - f v vsync frequency ma 1,250 1,150 - (c) dot ma 1,200 1,000 - (b) white (2) ma 900 750 - i dd (a) black current of power supply (1) v 19 18 17 v dd voltage of power supply note unit max. typ. min. symbol item www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information (1) fv=60hz, fdclk =134.25mhz, vdd = 18.0v, dc current. (2) power dissipation check pattern (lcd module only) rush current i rush can be measured when t rush . is 1.5ms. t rush =1.5ms 100% gnd 90% 10% v dd (3) measurement condition a) black pattern b) white pattern c) dot pattern www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information 3.2 back light unit the back light unit is a direct type 16 ccfts ( cold cathode fluorescent tube ) the characteristics of lamps are shown in the following tables. ta=25 ? 2 ? c 25 ? : 1,700 (5) vrms 0 ? : 1,850 - vs startup voltage (3) hour - - 50,000 hr operating life time (2) khz 60 - 40 f l lamp frequency vrms - 1120 - v l lamp voltage (1) marms 7.5 6.0 4.0 i l lamp current note unit max. typ. min. symbol item note (1) specified values are for a single lamp. lamp current is measured with current meter for high frequency as shown below. refer to the following block diagram of the back light unit for more information. fig. measurement point of lamp current inverter : sit300m1xxxx x -$%.pevmf *owfsufs *owfsufs pink white pink white pink white pink white pink white pink white white pink white pink www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information (2) lamp frequency which may produce interference with horizontal synchronous frequency may cause line flow on the displa y. therefore lamp frequency should be detached from the horizontal synchronous frequency and its harmonics as far as possible in order to avoid interference. (3) life time (hr) is defined as the time when brightness of a lamp unit itself becomes 50% or less than its original val ue at the condition of ta = 25 ? 2 ? c and i l = 6.0marms (4) if an inverter has shutdown function, it should keep its output for over 1 second even if the lamp connector is open. ot herwise the lamps may not be turned on. www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information 3.3 inverter specification (note) ? open lamp voltage measurement - vopen : all output connectors open, then tw o voltage probe touch on one lamp output terminals simultaneously - one wire open voltage : one wire of lamp open, then two voltage probes touch on one lamp output terminals simultaneously ? the open lamp voltage indicates t he secondary voltage of transformer. in case of open lamp voltage-measurement , they must be tested simultaneously. sec 2.0 1.5 1.0 v in =24v t sd shutdown time 9 hz 160 150 140 v in =24v f pwm pwm frequency 8 vrms 1850 v in =24v,pwm duty=100% each transformer output v open open lamp voltage 7 v 2.8 0 v in =24v v adim analog mode signal 6 0.8 0 - off v 5.25 2.4 - on backlight on/off control 5 khz 65 60 55 v in =24v f 0 lamp frequency 4 4.0 3.5 3.0 vin=24v, v adim 0.0v i 0min marms 6.5 6.0 5.5 vin=24v, v adim 2.8v i omax output current 3 3.5 after 1 hour aging a 7 vin=24v, v adim =2.8v i in input current 2 v 26.4 24.0 21.6 - v in input voltage 1 unit max. typ. min. condition sym item no. www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information 4. block diagram 4.1 tft lcd module %bub%sjwfs $pmvno
(buf %sjwfs 3px
-$% %sjwfs "obmph $jsdvju 39 5jnjoh $pouspmmfs 4jhobm $poofdup s 1pxfs $poofdup s %vbm 5.%4 4jhobm %$ 1pxfs 4vqqmz 5'5-$% (buf %sjwfs 3px
4.2 back light unit cn1 hot 1, 2 hot 3, 4 hot 5, 6 hot 7, 8 hot 9, 10 hot 11, 12 ccfl 1 ccfl 3 ccfl 5 ccfl 7 ccfl 9 ccfl 11 pink white cn2 pink white cn3 pink white cn4 pink white cn5 pink white cn6 pink white ccfl 2 ccfl 4 ccfl 6 ccfl 8 ccfl 10 ccfl 12 hot 13, 14 ccfl 13 cn7 pink white ccfl 14 hot 15, 16 ccfl 15 cn8 pink white ccfl 16 www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information 5. input terminal pin assignment 5.1.1 input signal ( connector : is100-l30o-c23 or compatible ) * if the system already uses the 1, 2 pins, it should keep under gnd level the voltage applied to those pins should not exceed -200mv. 5.1.2. input power 1) connector (receptacle) : 53261 (molex) of equivalent. 2) mating connector (plug) : 51021 or its equivalent. nc nc 29 shield for tmds channel c shldc 14 nc nc 30 tmds positive differential output (channel c) rxc+ 15 nc nc 28 tmds negative differential output (channel 0) rx0- 13 nc nc 26 shield for tmds channel 0 shld0 11 nc nc 27 tmds positive differential output (channel 0) rx0+ 12 tmds negative differential output (channel 3) rx3- 25 tmds negative differential output (channel 1) rx1- 10 tmds positive differential output (channel 3) rx3+ 24 tmds positive differential output (channel 1) rx1+ 9 tmds positive differential output (channel 4) rx4+ 21 tmds positive differential output (channel 2) rx2+ 6 tmds negative differential output (channel 4) rx4- 22 tmds negative differential output (channel 2) rx2- 7 shield for tmds channel 3 shld3 23 shield for tmds channel 1 shld1 8 20 19 18 17 16 pin no shld2 nc nc nc nc symbol shield for tmds channel 2 nc nc ce (internal only) ctl (internal only) description shld4 rx5- rx5+ shld5 rxc+ symbol shield for tmds channel 4 tmds negative differential output (channel 5) tmds positive differential output (channel 5) shield for tmds channel 5 tmds negative differential output (channel c) description 5 4 3 2 1 pin no pull up 3.3v reserved reserved pull up 3.3v pull up 3.3v pull up 3.3v notes vsync output vs_out 14 ground gnd 15 hsync output hs_out 13 hdcp_data hdcp_dat 11 auto generate pattern agp 12 hdcp_clock hdcp_clk 10 ground gnd 9 lcm power supply, +18v ? 5% vlcd 6 lcm power supply, +18v ? 5% vlcd 7 lcm power supply, +18v ? 5% vlcd 8 vlcd gnd pwr_on scl sda symbol lcm power supply, +18v ? 5% ground lcm on control signal input sil1169 hdcp program mode clk sil1169 hdcp program mode data description 5 4 3 2 1 pin no www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information 5.1.3. inverter input connector : s14b-pha-sm (jst) or compatible. /psnbm_7 "copsnbm _7 -bnq0qfsbujoh4ubuvt 4ubuvt .by7.jo
7 18.%jnnjoh$pouspm4jhobm 7 #3 0/7_7 0''_7 #-0o0gg$pouspmtjhobm 7 0/ /pdpoofdujpo 74 1pxfs(spvoe (/% 1pxfs(spvoe (/% 1pxfs(spvoe (/% 1pxfs(spvoe (/% 1pxfs(spvoe (/% 1pxfs4vqqmz 7 7 #- 1pxfs4vqqmz 7 7 #- 1pxfs4vqqmz 7 7 #- 1pxfs4vqqmz 7 7 #- 1pxfs4vqqmz 7 7 #- /puft %ftdsjqujpo 4zncpm 1jo www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information note) pin number starts from right side pin no. 1 pin no. 30 control pcb a. all gnd pins should be connected together and also be connected to the lcd?s metal chassis. b. all power input pins should be connected together. c. all nc pins should be separated from other signal or power. fig. connector diagram is100-l30o-c23 ? #1 #30 ? pin no. 1 pin no. 15 ? 53261 #1 #15 ? www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information 5.2 back light unit high voltage white hot 6-2 high voltage pink hot 6-1 high voltage white hot 7-2 high voltage pink hot 7-1 high voltage white hot 4-2 high voltage pink hot 4-1 high voltage white hot 3-2 high voltage pink hot 3-1 20022wr-14(l)(yeonho) or compatible. connector part no. high voltage white hot 8-2 high voltage pink hot 8-1 high voltage white hot 5-2 high voltage pink hot 5-1 high voltage white hot 2-2 high voltage pink hot 2-1 high voltage white hot 1-2 high voltage pink hot 1-1 function color input pin no. www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information 5.3 input signals, basic display colo rs and gray scale of each color b255 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue b254 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 b253 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : b3~ b252 : : : : : : : : : : : : : : : : : : b2 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 b1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 dark ? - light b0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of blue g255 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 green g254 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 g253 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : g3~ g252 : : : : : : : : : : : : : : : : : : g2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 g1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 dark ? - light g0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of gree n r255 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 red r254 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 r253 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 : : : : : : : : : : : : : : : : : : r3~ r252 : : : : : : : : : : : : : : : : : : r2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 r1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 dark ? - light r0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of red - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 white - 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 yellow - 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 magenta - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 red - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 cyan - 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 green - 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black basic colo r b7 b6 b5 b4 b3 b2 b1 b0 g7 g6 g5 g4 g3 g2 g1 g0 r7 r6 r5 r4 r3 r2 r1 r0 blue green red gray scale level data signal display (8bit) colo r note (1) definition of gray : rn : red gray, gn : green gray, bn : blue gray (n = gray level) input signal : 0 = low level vo ltage, 1 = high level voltage www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information 6.1 timing parameters ( dual mode : 2,560*1,600 ) 6. interface timing 2pxl/clk + + a pixels 160 160 160 t hbp horizontal blank period a pixels 80 80 80 t hfp horizontal back porch pixels 48 48 48 t hbp horizontal front porch pixels 32 32 32 t hw hsync width pixels 2560 2560 2560 2pixel/clock (3) clocks 1280 1280 1280 t hd display period horizontal active display term y + t + ? lines 46 46 46 t vb vertical blank period ? lines 37 37 37 t vbp vertical back porch t lines 3 3 3 t vfp vertical front porch y lines 6 6 6 t vw vsync width lines 1600 1600 1600 t vd display period vertical active display term clocks 2720 2720 2720 t h cycle one line scanning time lines 1646 1646 1646 msec 16.7 16.7 16.7 t v cycle frame frequency nsec - - - t es setup time data enable nsec 3.725 3.725 3.725 t cl low time nsec 3.725 3.725 3.725 t ch high time (1),(2) ? 134.25 134.25 134.25 1/t c frequency clock note unit max. typ. min. symbol item signal note 1) test point : ttl control signal and clk at tmds tx input terminal in system note 2) internal vcc 3.3 v note 3) de signal should have a same period. note 4) vesa cvt spec (reduced blanking) note 5) vesa cvt name : 4.10ma-r www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information 6.2 timing parameters ( single mode : 1,280*800 ) 1pxl/clk + + a pixels 160 160 160 t hbp horizontal blank period a pixels 80 80 80 t hbp horizontal back porch pixels 48 48 48 t hfp horizontal front porch pixels 32 32 32 t hw hsync width pixels 1280 1280 1280 1pixel/clo ck (3) clocks 1280 1280 1280 t hd display period horizontal active display term y + t + ? lines 23 23 23 t vb vertical blank period ? lines 14 14 14 t vbp vertical back porch t lines 3 3 3 t vfp vertical front porch y lines 6 6 6 t vw vsync width lines 800 800 800 t vd display period vertical active display term clocks 1440 1440 1440 t h cycle one line scanning time lines 823 823 823 msec 16.7 16.7 16.7 t v cycle frame frequency nsec - - - t es setup time data enable nsec 7.04 7.04 7.04 t cl low time nsec 7.04 7.04 7.04 t ch high time (1),(2) ? 71 71 71 1/t c frequency clock note unit max. typ. min. symbol item signal note 1) test point : ttl control signal and clk at tmds tx input terminal in system note 2) internal vcc 3.3 v note 3) de signal should have a same period. note 4) vesa cvt spec (reduced blanking) note 5) vesa cvt name : 1.02ma-r note 6) to operate single mode, sil1169 should be programmed. www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information 6.3 timing diagrams of interface signal ( de only mode ) 5 &4 de 5 $) 5 $- 5 $ d clk 5 %4 5 %) display data 7 %% 7 %% 7 %% 7 %% 7 %% 7 %% 7 %% 7 %% 7 %% www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information 6.4 tmds interface timing setting 6.5 tmds rx(sil1169) programming mode data 53 5b 0f 02 02 0e 45 05 0d 00 00 0c 08 08 0b 32 32 0a 07 07 09 slave master sii 1169 address note 1) for the normal operating, lcm tmds rx (sil1169) should be programmed using the above programming mode data note 2) tmds rx should be re-programmed each power on/off status. note 3) the above programming mode is recommended value. if the different data is programmed, it may cause abnormal display or no display. www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information 6.6 tmds rx(sil1169) inpu t skew : tccs = max 4ns 6.7 tmds rx(sii1169) i2c data va lid delay : ti2cdvd = max 700ns www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information 6.8 power on/off sequence to prevent a latch-up or dc operation of the lcd module, the power on/off sequence should be as the diagram below. t1 : v dd rising time from 10% to 90% t2 : the time from v dd to valid data at power on. t3 : the time from valid data off to v dd off at power off. t4 : v dd off time for windows restart t5 : the time from valid dat a to b/l enable at power on. t6 : the time from valid data off to b/l disable at power off. ? the supply voltage of the external system for the module input should be the same as the definition of v dd . ? apply the lamp voltage within the lcd oper ation range. when the back light turns on before the lcd operation or the lcd turn s off before the back light turns off, the display may momentarily show abnormal screen. ? in case of v dd = off level, please keep the level of input signals low or keep a high impedance. ? t4 should be measured after the module has been fully discharged between power off and on period. ? interface signal should not be kept at high impedance when the power is on. 300 k? t1 ? 10msec 0 ? t2 ? 500msec 0 ? t3 ? 50msec 1sec ? t4 back-light (recommended) 500msec ? t5 100msec ? t6 powr_on www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information 6.9 inverter power sequence 1) rising time of v in 2) on/off sequence of v in 3) power sequence on/off 90% t3 t 3 , t4 ? 500msec dimmer t 5 t5 , t6 ? 0 sec t4 t 6 v in 0v t1 v in 10% 90% t1 ? 20 msec 0v v in v in ? 0.7v t2 t2 ? 200 msec ? ? ? ? ? vin dimmer on/off www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information 6.10 vdd power dip condition 17v ? v dd ? 19v if v dd (typ.) x 80% ? v cc ? v dd (typ) x 90% then, 0

1bhf @-5..1 .0%&- product information product information 7. outline dimension [ refer to the next page ] www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information (a) when the module is assembled, it s hould be attached to the system firmly using all mounting holes. be carefu l not to twist and bend the module. (b) because the inverter uses high volt ages, it should be disconnected from power source before it is assembled or disassembled. (c) refrain from strong mechanical s hock and / or any force to the module. in addition to damage, it may cause improper operation or damage to the module and ccft back light. (d) note that polarizer films are ve ry fragile and could be damaged easily. do not press or scratch the surfac e harder than a hb pencil lead. (e) wipe off water droplets or oil immediat ely. if you leave the droplets for a long time, staining or discoloration may occur. (f) if the surface of the polarizer is dirty, clean it using absorbent cotton or soft cloth. (g) desirable cleaners are water, ip a (isopropyl alcohol) or hexane. do not use ketone type materials (ex. acetone), ethyl alcohol, toluene, ethyl acid or methyl chloride. it might cause perm anent damage to the polarizer due to chemical reaction. (h) if the liquid crystal mate rial leaks from the panel, it should be kept away from the eyes or mouth . in case of c ontact with hands, legs or clothes, it must be washed away with soap thoroughly. (i) protect the module from static, or the cmos gate array ic would be damaged. (j) use finger-stalls with soft gloves in order to keep display clean during the incoming inspection and assembly process. (k) do not disassemble the module. (l) do not pull or fold the lamp wire. (m) do not adjust the variable resistor located on the module. (n) protection film for polarizer on the modul e should be slowly peeled off just before use so that the electrostati c charge can be minimized. (o) pins of i/f connector should not be touched directly with bare hands. 8. general precautions 8.1 handling www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information 8.2 storage (a) do not leave the module in high temper ature, and high humidity for a long time. it is highly recommended to store the module with temperature from 0 to 35 ? and relative humidity of less than 70%. (b) do not store the tft-lcd m odule in direct sunlight. (c) the module should be stored in a dark place. it is prohibi ted to apply sunlight or fluorescent light in storing. 8.3 operation (a) do not connect or disconnect the m odule in the "power on" condition. (b) power supply should always be turned on/off by the item 6.3 "power on/off sequence" (c) module has high frequency circuits. su fficient suppression to the electromagnetic interference should be done by system manufacturers. grounding and shielding methods may be important to minimize the interference. (d) the cable between the back light connec tor and its inverter power supply should be connected directly with a minimi zed length. a longer cable between the back light and the inverter may caus e lower luminance of lamp(ccft) and may require higher startup voltage(vs). 8.4 operation condition guide (a) the lcd product should be operated under normal conditions. normal condition is defined as below; - temperature : 20 ? 15 ? - humidity : 65 ? 20% - display pattern : continually changing pattern (not stationary) (b) if the product will be used in extreme conditions such as high temperature, humidity, display patterns or operati on time etc.., it is strongly recommended to contact sec for application engineeri ng advice. otherwise, its reliability and function may not be guaranteed. extreme conditions are commonly found at airports, transit stations, banks, stock market, and controlling systems. www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..1 .0%&- product information product information 8.5 others (a) ultra-violet ray filter is necessary for outdoor operation. (b) avoid condensation of water. it may resu lt in improper operation or disconnection of electrode. (c) do not exceed the absolute maximum ra ting value. ( supply voltage variation, input voltage variation, variation in part contents and environmental temperature, and so on) otherwise the module may be damaged. (d) if the module keeps displaying the sa me pattern for a long period of time, the image may be "sticked" to the screen. to avoid image sticking, it is recommended to use a screen saver. (e) this module has its circuitry pc b's on the rear side and should be handled carefully in order not to be stressed. (f) please contact sec in advance when you display the same pattern for a long time. www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of LTM300M1-P01

	To Download LTM300M1-P01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .